T500 Boiler Alembic Copper Dome And Alembic Copper Condensor

This Alembic Pot Still is made up of the T500 Boiler with a Pot Still Alembic Dome Top and Pot Still Alembic Condenser.

These additions transform the T500 into an Alembic Pot Still. Instead of stripping flavours to give clean spirit like the T500, this pot still retains and enhances flavours. This can be used when distilling washes that contain flavours that you wish to collect.

The Pot Still Alembic Condenser is best used with the T500 Boiler and the Pot Still Alembic Dome Top. You can use this with the T500 Boiler without the Pot Still Alembic Dome Top, to do this it fits on to the lid of the T500 Boiler. This condenser is what differentiates this still from the T500. It is what retains the flavour rather than stripping it out by refluxing. This comes with a thermometer, tubing and tap adaptor set.

The Pot Still Alembic Dome Top is copper and fits on to the T500 Boiler. The large copper surafce area of this dome top acts as a catalyst with the vapour in the still and helps enhance and concentrate the flavours and aromas as well as remove unwanted sulphur compounds. This produces a smoother, richer, sweeter tasting spirit.

Note:

The Alembic shouldn’t be used with the Water Flow Regulator. Even when it’s at full blast, it produces around 2.4L/min. Sometimes when distilling you need a higher flow rate, so the water should come straight from the tap and not the Water Regulator.

Unlike the T500, the Alembic is more forgiving to a fluctuation in temperature. If you connect the tubing straight to the tap, you shouldn’t have any issues.

Internal measurements of boiler:

• Height:420 mm
• Max Fill Height:345 mm
• Diameter:295 mm